Overview
The Avaya IP406 V1 (formerly just call IP406) differs from the IP403 Office in that it supports six expansion modules but excludes the integral Digital extension and Analog extension ports. The IP406 V1 Office base unit is 19" rack mountable and supports as standard.
- Eight 10/100 Mbps LAN Hub ports.
- DTE Port.
- X.21/V35 WAN interface.
- Support for 6 Expansion Modules.
- Two relay switch port for door entry systems (External O/P socket)
- Audio port for external music on hold source.
- 24 Data channels (Maximum 20 useable for Voicemail Pro).
- Note: A data channel is used whenever a call is made from
the IP network to an exchange line (Central Office). For example,
four people surfing the Internet will use a single data channel
since they all share the same line to the ISP. Two people
remotely accessing the Office LAN from home will use two data
channels since they have dialed in on separate lines. IP extensions
do not use data channels.
The IP406 V1 Office can be ordered in four trunk configurations Quad BRI, PRI (T1), PRI (E1) and 4 x Analog (loop start) trunks. A spare expansion slot is available to add an additional trunk card (Analog, BRI or PRI).
- Note: Some configurations are only available in certain territories, please check for local availability.
Optional internal upgrades allow for the support of up to 2 x V.90 modem calls and a 5, 10 or 20 channel Voice Compression Module (VCM). The VCM module supports 5, 10 or 20 simultaneous voice over IP sessions. These can be used for either providing networking between sites over a Wide Area Network or supporting IP Telephones and Soft phones. An IP extension only uses the compression module whilst on a call to a non-IP extension/line. Hence, it is possible to support more extensions than the capacity of the VCM.
Through support of up to six external Expansion Modules, IP406 V1 office can be enhanced to support a mixture of Analog, Digital or IP Handsets to maximum of 180. |
